Cart
Audio technica AT2035-Studio
- Read reviews (1)
- Related accessories
- Similar products
VIDEO
VIDEO
This article is no longer available for sale.
Unavailable
contact us
Stock in store
Not available in store
The brand Audio technica
Learn more about the Audio technica brand and discover the entire catalog.
The largest network of stores in France
Find all the information on our superstores and our specialized boutiques.
Contact an expert
Our musician and enthusiast tele-consultants are here to answer all your questions.
Home studio set
The AT2035-Studio from Audio-Technica & Audient is the ultimate project studio kit, containing
- AT2035 Cardioid Condenser Microphone
- ATH-M40X Professional Monitor Headphones
- Exclusive, Audient iD4 Black audio interface
- Free software
- Software Bundle: Ultrachannel & Ultrareverb from Eventide, Cubase LE & Cubasis LE2.
- AT2035 Cardioid Condenser Microphone
- ATH-M40X Professional Monitor Headphones
- Exclusive, Audient iD4 Black audio interface
- Free software
- Software Bundle: Ultrachannel & Ultrareverb from Eventide, Cubase LE & Cubasis LE2.
Lire la suite
Technical sheet
- AT2035
- Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom shock mount provides superior isolation
- Switchable 80 Hz high-pass filter and 10 dB pad
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Includes custom shock mount & protective pouch
- Frequency response 20Hz - 20kHz
- Low Frequency Roll Off 80 Hz, 12 dB/octave
- Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
- Impedance 120 ohms
- Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
- Dynamic Range 136 dB, 1 kHz at Max SPL
- Signal to Noise Ratio 82 dB, 1 kHz at 1 Pa
- ATH-M40X
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: CCAW (Copper-clad aluminum wire)
- Frequency Response: 15 - 24,000 Hz
- Max Input Power: 1,600 mW @ 1KHz
- Sensitivity: 96 dB
- Impedance: 35 ohms
- Folding/collapsible: Yes
- Weight: (Without cable) 8.5 oz (240 g)
- Cable
- Detachable: Yes
- Cable Includes: 1.2m-3m coiled, 3m straight cables
- Connector: Gold-plated stereo 1/8” (3.5 mm) connector with strain relief
- Accessories included: Screw-on 1/4” adapter, pouch
- Audient iD4
- 2 channels USB audio interface
- MICROPHONE PREAMPLIFIER:
- MIC GAIN: 0 to 58 dB
- LINE GAIN: -10 to 48 dB (-10dB hardwired line pad)
- PHANTOM POWER: 48V ±4V @ 10mA/Channel
- MIC EIN: <-126.0 dBu
- CMRR: >75 dB @ 1kHz
- MAXIMUM INPUT LEVEL: +12 dBu (0 dBFS digital Maximum)
- INPUT IMPEDANCE (Mic): 2.8 kΩ Balanced
- INPUT IMPEDANCE (Line): >8kΩ Balanced
- FREQUENCY RESPONSE: ±0.1 dB 20Hz to 22kHz @ min. gain ±1.0 dB 20Hz to 22kHz @ max. gain
- CROSSTALK: <-91 dBu
- THD+N @ 0dBu (1kHz): 0.0015% (-96.5dBu)
- SNR: 96 dB un-weighted, 99 dB A-weighted
- XLR Combi Female Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield) 1/4" TRS Jack Tip (Hot), Ring (Cold) & Sleeve (Shield)
More specifications
Fewer specifications